Publications
Shooter, S. B., Simpson, T. W., Kumara, S. R. T., Stone, R. B. and Terpenny, J. P. (2005) Toward a Multi-Agent Information Infrastructure for Product Family Planning and Mass Customization, International Journal of Mass Customization, 1:1 (134-155).
Clarke, S. M., Griebsch, J. H. and Simpson, T. W. (2005) Analysis of Support Vector Regression for Approximation of Complex Engineering Analyses, ASME Journal of Mechanical Design, 127:6 (1077-1087).
Park, J. and Simpson, T. W. (2005) Development of a Production Cost Estimation Framework to Support Product Family Design, International Journal of Product Research, 43:4 (731-772).
Ligetti, C. and Simpson, T. W. (2005) Metamodel-Driven Design Optimization Using Integrative Graphical Design Interfaces: Results from a Job Shop Manufacturing Simulation Experiment, ASME Journal of Computing and Information Science in Engineering, 5:1 (8-17).
Martin, J. D. and Simpson, T. W. (2005) On the Use of Kriging Models to Approximate Deterministic Computer Models, AIAA Journal, 43:4 (853-863).
Martin, J. and Simpson, T. W. (2005) On Using Kriging Models as Probabilistic Models in Design, SAE Transactions, 5: (129-139).
McAllister, C. D., Simpson, T. W., Hacker, K., Lewis, K., Messac, A. (2005) Integrating Linear Physical Programming within Collaborative Optimization for Multiobjective Multidisciplinary Design Optimization, Structural and Multidisciplinary Optimization, 29:3 (178-189).
Simpson, T. W. and Thevenot, H. (2005) Using Product Dissection to Integrate Product Family Design Research into the Classroom and Improve Students' Understanding of Platform Commonality, ASME Design Engineering Technical Conferences - Design Theory and Methodology Conference, Wood, W. H., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DTM-84639.
Thevenot, H., Nanda, J. and Simpson, T. W. (2005) A Methodology to Support Product Family Redesign using Genetic Algorithm and Commonality Indices, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84927.
Nanda, J., Simpson, T. W., Shooter, S. B. and Stone, R. B. (2005) A Unified Information Model for Product Family Design Management, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84869.
Nanda, J., Thevenot, H. and Simpson, T. W. (2005) Product Family Representation and Redesign: Increasing Commonality using Formal Concept Analysis, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84818.
Park, J. and Simpson, T. W. (2005) An Activity-Based Costing Method for Product Family Design in the Early Stages of Development, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84817.
Martin, J. D. and Simpson, T. W. (2005) A Methodology to Manage Uncertainty during System-Level Conceptual Design, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84984.
Srinivasan, A., Terpenny, J. P., Simpson, T. W., Kumara, S. R. T., Shooter, S. B. and Stone, R. B. (2005) Online Case Studies and a Process Description for Product Platform Planning, ASME Design Engineering Technical Conferences - Design Theory & Methodology Conference, Wood, W. H., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DTM-85338.
Akundi, S., Simpson, T. W. and Reed, P. M. (2005) Multi-objective Design Optimization for Product Platform and Product Family Design Using Genetic Algorithms, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-84905.
Yannou, B., Moreno, F., Thevenot, H. and Simpson, T. W. (2005) Faster Generation of Feasible Design Points, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C., ed., Long Beach, CA, September 24-28, ASME, Paper No. DETC2005/DAC-85449.
Simpson, T. W., Stone, R. B., Shooter, S. B., Terpenny, J. P. and Kumara, S. R. T. (2005) An Inter-University Collaborative Undergraduate Research/Learning Experience for Product Platform Planning, 2005 ASEE Annual Conference & Exposition, Portland, OR, June 12-15, ASEE.
Srinivasan, A., Terpenny, J. P., Shooter, S. B., Stone, R., Simpson, T. W. and Kumara, S. R. T. (2005) An Online Learning Tool for Product Platform Planning, 2005 ASEE Annual Conference & Exposition, Portland, OR, June 12-15, ASEE.
Simpson, T. W., Iyer, P., Barron, K., Rothrock, L., Frecker, M., Barton, R. R. and Meckesheimer, M. (2005) Metamodel-Driven Interfaces for Engineering Design: Impact of Delay and Problem Size on User Performance, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference and 1st AIAA Multidisciplinary Design Optimization Specialist Conference, Austin, TX, April 18-21, AIAA, AIAA-2005-2060.
Gano, S. E., Renaud, J. E., Martin, J. D. and Simpson, T. W. (2005) Update Strategies for Kriging Models for Using in Variable Fidelity Optimization, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference and 1st AIAA Multidisciplinary Design Optimization Specialist Conference, Austin, TX, April 18-21, AIAA, AIAA-2005-2057.
Yuksih, M. A. and Simpson, T. W. (2005) Analysis of an O(n^2) Algorithm for Identifying Pareto Points in Multi-Dimensional Data Sets, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference and 1st AIAA Multidisciplinary Design Optimization Specialist Conference, Austin, TX, April 18-21, AIAA, AIAA-2005-1812.
Simpson, T. W., Booker, A. J., Ghosh, D., Giunta, A. A., Koch, P. N., and Yang, R.-J. (2004) Approximation Methods in Multidisciplinary Analysis and Optimization: A Panel Discussion, Structural and Multidisciplinary Optimization, 27:5 (302-313).
Martin, J. and Simpson, T. W. (2004) On Using Kriging Models as Probabilistic Models in Design, SAE Transactions Journal of Materials & Manufacturing, 5 (129-139).
Simpson, T. W., Medeiros, D. J., Joshi, S. B., Lehtihet, A., Wysk, R. A., Pierce, G. R., and Litzinger, T. A. (2004) IME, Inc. - A New Course for Integrating Design, Manufacturing, and Production into the Engineering Curriculum, International Journal of Engineering Education, 20:5 (764-776).
Wang, G. G. and Simpson, T. W. (2004) Fuzzy Clustering Based Hierarchical Metamodeling for Global Constrained Design Optimization, Engineering Optimization, 36:3 (313-335).
Simpson, T. W. and D'Souza, B. (2004) Assessing Variable Levels of Platform Commonality within a Product Family Using a Multiobjective Genetic Algorithm, Concurrent Engineering: Research and Applications, 12:2 (119-130).
Srivastava, A., Hacker, K., Lewis, K. and Simpson, T. W. (2004) A Method for Using Legacy Data for Metamodel-based Design of Large-Scale Systems, Structural and Multidiscipilnary Optimization, 28:2-3 (146-155).
Park, J. and Simpson, T. W. (2004) Development of a Production Cost Estimation Framework for Product Family Design, IIE Annual Research Conference, Houston, TX, May 15-19, IIE.
Simpson, T. W. and Meckesheimer, M. (2004) Evaluation of a Graphical Design Interface for Design Space Visualization, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 19-22, AIAA, AIAA-2004-1683.
Martin, J. and Simpson, T. W. (2004) On Using Kriging Models as Probabilistic Models in Design, 2004 SAE World Congress, Detroit, MI, March 8-11, SAE, Paper No. 2004-01-0430.
Stump, G., Yukish, M., Simpson, T. W., Harris, E. N. and O'Hara, J. J. (2004) Trade Space Exploration of Satellite Datasets Using a Design by Shopping Paradigm, IEEE Aerospace Conference, Big Sky, MT, March 6-13, IEEE, IEEE-1039-04.
Ligetti, C. and Simpson, T. W. (2004) Metamodel Development for Graphical Design Interfaces: Results from a Manufacturing Simulation Experiment, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, August 30 - September 2, AIAA, AIAA-2004-4447.
McAllister, C. D., Simpson, T. W., Lewis, K. and Messac, A. (2004) Integrating Linear Physical Programming within Collaborative Optimization for Multiobjective Multidisciplinary Design Optimization, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, August 30 - September 2, AIAA, AIAA-2004-4549.
Yukish, M. and Simpson, T. W. (2004) Analysis of an Algorithm for Identifying Pareto Points in Multi-Dimensional Data Sets, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, August 30 - September 2, AIAA, AIAA-2004-4324.
Martin, J. D. and Simpson, T. W. (2004) A Monte Carlo Simulation of the Kriging Model, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, August 30 - September 2, AIAA, AIAA-2004-4483.
Stump, G., Yukish, M. and Simpson, T. W. (2004) The Advanced Trade Space Visualizer: An Engineering Decision-Making Tool, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, August 30 - September 2, AIAA, AIAA-2004-4568.
Thevenot, H. and Simpson, T. W. (2004) A Comparison of Commonality Indices for Product Family Design, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W., ed., Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/DAC-57141.
Shooter, S. B., Simpson, T. W., Kumara, S. R. T., Stone, R. B. and Terpenny, J. P. (2004) Toward an Information Management Infrastructure for Product Family Planning and Platform Customization, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W., ed., Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/DAC-57430.
Mulberger, J. and Simpson, T. W. (2004) Advancements in a Web-based Framework for Product Platform Optimization and Visualization, ASME Design Engineering Technical Conferences - Computers and Information in Engineering, Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/CIE-57688.
Nanda, J., Thevenot, H., Simpson, T. W., Kumara, S. R. T. and Shooter, S. B. (2004) Exploring Semantic Web Technologies for Product Family Modeling, ASME Design Engineering Technical Conferences - Computers and Information in Engineering, Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/CIE-57683.
Park, J. and Simpson, T. W. (2004) Development of a Production Cost Estimation Framework for Product Family Design, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W., ed., Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/DAC-57175.
Martin, J. D. and Simpson, T. W. (2004) On the Use of Kriging Models to Approximate Deterministic Computer Models, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W., ed., Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/DAC-57300.
Barron, K., Simpson, T. W., Rothrock, L., Frecker, M., Barton, R. R. and Ligetti, C. (2004) Graphical User Interfaces for Engineering Design: Impact of Response Delay and Training on User Performance, ASME Design Engineering Technical Conferences - Design Theory & Methodology Conference, Salt Lake City, UT, September 28 - October 2, ASME, Paper No. DETC2004/DTM-57085.
Rothrock, L., Barron, K., Simpson, T. W., Frecker, M., Barton, R. R. and Ligetti, C. (2004) Applying the Proximity Compatibility and the Control-Display Compatibility Principles toward Engineering Design, Human Factors and Ergonomics Society's 48th Annual Meeting, New Orleans, LA, Sept. 20-24, 411-415.
Ligetti, C., Simpson, T. W., Frecker, M., Barton, R. R. and Stump, G. (2003) Assessing the Impact of Graphical Design Interfaces on Design Efficiency and Effectiveness, ASME Journal of Computing and Information Science in Engineering, 3:2 (144-154).
D'Souza, B. and Simpson, T. W. (2003) A Genetic Algorithm Based Method for Product Family Design Optimization, Engineering Optimization, 35:1 (1-18).
Farrell, R. and Simpson, T. W. (2003) "Product Platform Design to Improve Commonality in Custom Products," Journal of Intelligent Manufacturing, 14:6 (541-556).
Simpson, T. W., Nanda, J., Sachin, H., Umapathy, K., and Hodge, B. (2003) "Development of a Framework for Web-based Product Platform Customization," ASME Journal of Computing and Information Science in Engineering, 3:2 (119-129).
McAllister, C. D. and Simpson, T. W. (2003) Multidisciplinary Robust Design Optimization of an Internal Combustion Engine, ASME Journal of Mechanical Design, 125:1 (124-130).
R. Caffrey, T. Simpson, R. Henderson and E. Crawley, 2002, "The Strategic Issues with Implementing Open Avionics Platforms for Spacecraft", IEEE Aerospace Conference, Big Sky, MT, March 9-16, 2002, IEEE. (Equal contributions by authors) – Refereed by abstract.
B. D'Souza and T. Simpson, 2002, "A Genetic Algorithm-based Approach for Product Family Design", Design Automation Conference at the 2002 ASME Design Engineering Technical Conferences, September 29 - October 2, 2002, Montreal, Canada.
J. Nanda, R. Iera, S. Clarke and T. Simpson, 2002, "Information Infrastructure for Web-based Evaluation of Bus Technologies", Computers and Information in Engineering Conference at the 2002 ASME Design Engineering Technical Conferences, September 29 - October 2, 2002, Montreal, Canada.
J. Nanda, H. Sachin, K. Umapathy, T. Simpson and B. Hodge, 2002, "A Framework for Web-based Product Customization and Ordering", Computers and Information in Engineering Conference at the 2002 ASME Design Engineering Technical Conferences, September 29 - October 2, 2002, Montreal, Canada.
T. Simpsoon, J. Peplinski, P. Koch and J. Allen, 2001, "Metamodels for Computer-Based Engineering Design: Survey and Recommendations", Engineering with Computers, 17:2 (129-150). (Principal author).
T. Simpson, J. Maier and F. Mistree, 2001, "Implementation of DFA in Conceptual and Embodiment Design Using Decision Support Problems", Research in Engineering Design, 13:1 (2-22). (Principal author).
M. Meekesheimer, R. Barton, T. Simpson, F. Limayem and B. Yannou, 2001, "Metamodeling of Combined Discrete/Continuous Responses", AIAA Journal, 39:10 (1950-1959). (Equal contributions by authors).
R. Farrell and T. Simpson, 2001, "Improving Commonality in Custom Products Using Product Families", 2001 ASME Design Technical Conferences - Design Automation Conference (Diaz, A., ed.), Pittsburgh, PA, September 9-12, ASME, Paper No. DETC2001/DAC-21125. (First author supervised by candidate).
C. McAllister and T. Simpson, "Multidisciplinary Robust Design Optimization of an Internal Combustion Engine", 2001 ASME Design Technical Conferences - Design Automation Conference (Diaz, A., ed.), Pittsburgh, PA, September 9-12, ASME, Paper No. DETC2001/DAC-21124. (First author supervised by candidate).
T. Simpson, D. Medeiros, S. Joshi, R. Wysk and A. Lehtihet, 2001, "IME, Inc. - A New Course for Integrating Design, Manufacturing, and Production into the Engineering Curriculum", 2001 Annual ASEE Conference, Albuquerque, NM, June 24-27, ASEE. (Principal author).
M. Frecker, T. Simpson, J. Goldberg, R. Barton, B. Holewinski and G. Stump, 2001, Integrating Design Research into the Classroom: Experiments in Two Graduate Courses, 2001 Annual ASEE Conference, Albuquerque, NM, June 24-27, ASEE. (Equal contributions by authors).
T. Litzinger, J. Wise, S. Lee, T. Simpson and S. Joshi, 2001, "Assessing Readiness for Lifelong Learning", 2001 Annual ASEE Conference, Albuquerque, NM, June 24-27, ASEE. (Contributing author).
M. Meckesheimer, R. Barton and T. Simpson, 2001, "Experimental Design Issues for Simultaneous Fitting of Forward and Inverse Metamodels", Fourth St. Petersburg Workshop (Melas, V. C., Ed.), St. Petersburg, Russia, June 18-23, INFORMS. (First author supervised by candidate).
M. Meckesheimer, R. Barton, T. Simpson and A. Booker, "Computationally Inexpensive Metamodel Assessment Strategies", 2001 ASME Design Technical Conferences - Design Theory and Methodology (DTM'01) Conference (Allen, J. K., ed.), Pittsburgh, PA, September 9-12, ASME, Paper No. DETC2001/DAC-21028. (First author supervised by candidate).
R. Farrell and T. Simpson, Product Platform Design to Improve Commonality in Custom Products, 2001, Journal of Intelligent Manufacturing (submitted April 2001). (First author supervised by candidate).
T. Simpson, 2001, A Simple Hands-on Activity to Contrast Craft Production and Mass Production in the Classroom, Journal of Engineering Education (submitted May 2001). (Principal author).
R. Farrell, M. Mian, R. Barton, A. Bellegundu and T. Simpson, 2001, "A Graphical Approach to Robust Design: Design of a Belt-Reinforced Pressure Vessel", ASME Journal of Mechanical Design (submitted August 2001). (First and second authors supervised by candidate).
T. Simpson, D. Lin and W. Chen, 2001, "Sampling Strategies for Computer Experiments: Design and Analysis", International Journal of Reliability and Applications (submitted for second review August 2001). (Principal author).
R. Jin, W. Chen and T. Simpson, 2000, "Comparative Studies of Metamodeling Techniques under Multiple Modeling Criteria", 2000, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4801. (Equal contributions by authors).
C. McAllister, T. Simpson and M. Yukish, "Goal Programming Applications in Multidisciplinary Design Optimization", 2000, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4717. (First author supervised by candidate).
A. Messac, M. Martinez and T. Simpson, "Introduction of a Product Family Penalty Function Using Physical Programming", 2000, 8th AIAA/NASA/USAF/ISSMO Symposium on Multi-disciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4838. (Equal contributions by authors).
B. Wilson, D. Cappelleri, M. Frecker and T. Simpson, "Efficient Pareto Frontier Exploration Using Surrogate Approximations", 2000, 8th AIAA/NASA/USAF/ISSMO Symposium on Multi-disciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4895. (First author supervised by candidate).
R. Barton, M. Meckesheimer and T. Simpson, "Experimental Design Issues for Simultaneous Fitting of Forward and Inverse Metamodels", 2000 ASME Design Engineering Technical Conferences - Design Automation Conference (Renaud, J. E., ed.), Baltimore, MD, September 10-13, ASME, Paper No. DETC2000/DAC-14282. (Contributing author).
A. Messac, M. Martinez and T. Simpson, 2000, "Effective Product Family Design Using Physical Programming and the Product Platform Concept Exploration Method", 2000 ASME Design Engineering Technical Conferences - Design Automation Conference (Renaud, J. E., ed.), Baltimore, MD, September 10-13, ASME, Paper No. DETC2000/DAC-14252. (Equal contributions by authors).
R. Nayak, W. Chen and T. Simpson, 2000, "A Variation-Based Methodology for Product Family Design", 2000 ASME Design Engineering Technical Conferences - Design Automation Conference (Renaud, J. E., ed.), Baltimore, MD, September 10-13, ASME, Paper No. DETC2000/DAC-14264. (Equal contributions by authors).
D. Cappelleri, M. Frecker and T. Simpson, 2000, "Optimal Design of a PZT Bimorph Actuator for Minimally Invasive Surgery", 7th International Symposium on Smart Structures and Materials, Newport Beach, CA, March 5-9, SPIE, 3984 (321-335). (Contributing author).
E. Halberg, A. Belegundu, M. Yukish and T. Simpson, 2000, "Attribute-Based Multidisciplinary Optimization of Undersea Vehicles", 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4865. (First author supervised by candidate).
M. Yukish, L. Bennett and T. Simpson, 2000, Requirements on MDO Imposed by the Undersea Weapons Conceptual Design Problem, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, AIAA, Paper No. AIAA-2000-4816. (First author supervised by candidate).
P. Koch, T. Simpson, J. Allen and F. Mistree, 1999, "Statistical Approximations for Multidisciplinary Optimization: The Problem of Size", 1999, Special Multidisciplinary Design Optimization Issue of Journal of Aircraft, 36: 1 (275-286). (Contributing author).
T. Simpson, J. Maier and F. Mistree,1999, "A Product Platform Concept Exploration Method for Product Family Design", 1999 ASME Design Engineering Technical Conferences - Design Theory and Methodology - DTM'99, Las Vegas, NV, September 12-15, ASME, Paper No. DETC99/DTM-8761. (Principal author).
W. Chen, T. Simpson, J. Allen and F. Mistree, 1999, "Use of the Robust Concept Exploration Method to Facilitate the Design of a Family of Products", Simultaneous Engineering: Methodologies and Applications (Roy, U., Usher, J. M., et al., eds.), Gordon and Breach Science Publishers, Amsterdam, The Netherlands (247-278). (Principal author).
A. Srivastava, K. Hacker, K. Lewis and T. Simpson, 1999, "Development of a Kriging Based Surrogate Approximation Method for Large-Scale Systems", Design Optimization (submitted November 1999). (Equal contributions by authors).
Hernandez, G. A., Simpson, T. W., Allen, J. K., Bascaran, E., Avila, L. F., and Salinas, F., 1998, September 13-16, "Robust Design of Product Families for Make-to-Order Products," submitted to 1998 ASME Design Engineering Technical Conferences - Design Automation Conference, Atlanta, GA, Paper No. 98DETC/DAC-5595.
Simpson, T. W., Mauery, T. M., Korte, J. J., and Mistree, F., 1998, September 2-4, "Comparison of Response Surface and Kriging Models for Multidisciplinary Design Optimization," 7th Symposium on Multidisciplinary Analysis and Optimization, St. Louis, MI, AIAA-98-4755.
Simpson, T. W., Lautenschlager, U., and Mistree, F., 1998, "Mass Customization in the Age of Information: The Case for Open Engineering Systems, The Information Revolution: Present and Future (Read, W. H., and Porter, A. L., eds.), Ablex Publishing, Greenwich, CT, pp. 49-71.
Simpson, T. W., 1998, February, "Comparison of Response Surface and Kriging Models in the Multidisciplinary Design of an Aerospike Nozzle," NASA/CR-1998-206935, ICASE Report No. 98-16, Institute for Computer Applications in Science and Engineering (ICASE), NASA Langley Research Center, Hampton, VA.
Simpson, T. W., Chen, W., Allen, J. K. and Mistree, F., 1998, "Use of the Robust Concept Exploration Method to Facilitate the Design of a Family of Products, Simultaneous Engineering: Methodologies and Applications (Roy, U., et al., eds.), Chapman & Hall, New York.
Koch, P. N., Simpson, T. W., Allen, J. K., and Mistree, F.,1998, "Statistical Approximations for Multidisciplinary Optimization: The Problem of Size," Special Multidisciplinary Design Optimization (MDO) Issue of Journal of Aircraft.
Chen, W., Simpson, T. W., Allen, J. K., and Mistree, F., 1998, "Satisfying Ranged Sets of Design Requirements: A Design Metric Using Design Capability Indices, Engineering Optimization.
Simpson, T. W., Rosen, D., Allen, J. K., and Mistree, F., 1998, "Metrics for Assessing Design Freedom and Information Certainty in the Early Stages of Design," ASME Journal of Mechanical Design.
T. Simpson, 1998, "Comparison of Response Surface and Kriging Models in the Multidisciplinary Design of the Aerospike Nozzle", NASA/CR-1998-206935, ICASE Report No. 98-16, Institute for Computer Applications in Science and Engineering (ICASE) - NASA Langley Research Center, Hampton, VA. (Principal author).
Simpson, T. W., Peplinski, J., Koch, P. N., and Allen, J. K., 1997, September 15-17, "On the Use of Statistics in Design and the Implications for Deterministic Computer Experiments," Design Theory and Methodology-DTM'97, Sacramento, CA, ASME, Paper No. DETC97/DTM-3881.
Simpson, T. W., Rosen, D., Allen, J. K., and Mistree, F., 1996, August 18-20, "Metrics for Assessing Design Freedom and Information Certainty in the Early Stages of Design," Design Theory and Methodology - DTM'96, Irvine, CA, ASME, Paper No. 96-DETC/DTM-1521.
Chen, W., Simpson, T. W., Allen, J. K., and Mistree, F., 1996, August 18-20, "Using Design Capability Indices to Satisfy Ranged Sets of Design Requirements," Advances in Design Automation, Irvine, CA, ASME, Paper No. 96-DETC/DAC-1090.